USING A CENTRIFUGAL MILL FOR GRINDING LIME

  • Михаил Юрьевич Колобов
  • Александр Максимович Силин
  • Максим Павлович Морозов
  • Юрий Николаевич Александров
  • Илья Алексеевич Ротов
  • Галина Николаевна Кокурина
Keywords: lime, centrifugal mill, grinding efficiency

Abstract

Research has been carried out on grinding lime in a small-sized centrifugal mill. A mathematical model (regression equation) of grinding efficiency from the studied parameters was obtained. Maximum lime grinding efficiency with a hole diameter in the ring of 100-170 mm. As the diameter of the hole in the ring increased, the efficiency decreased. 

References

Kolobov M.Yu., Lapshin V.B., Sakharov S.E., Abalikhin A.M. Equipment for processing dispersed materials. International scientific conference “Theoretical foundations for the creation, optimization and management of energy- and resource-saving processes and equipment”. Collection of works. Volume II. Ivanovo, 2007. P. 13-15. Kolobov M.Yu., Sakharova S.G., Sakharov S.E. Shredder of bulk materials. Repair, restoration, modernization. Moscow, 2017. N 1. P. 9-12. Kolobova V.V., Kolobov M.Yu. Features of grinding phosphorus-containing ores. Agrarian bulletin of the Upper Volga region. Ivanovo, 2016. N 4 (16). P. 77-82. Kolobov M.Yu., Chagin O.V., Blinichev V.N. Increasing the durability of the working bodies of centrifugal impact shredders. Ros. Khim. Zh. 2019. T. LXIII, N 3-4. P. 40-44. DOI: 10.6060/rcj.2019633.5 Gushchina T.V., Gushchina E.A., Kolobov M.Yu., Blinichev V.N. Investigation of impact mill. Modern high technology. Regional application. 2020. N 3. P. 54-59. Kolobova V.V., Kolobov M.Yu. Increasing the efficiency of using gypsum materials. Modern high technology. Regional application. Ivanovo, 2021. N 4. P. 50-55. DOI: 10.6060/snt.20216804.0007 Kolobov M.Yu., Vorobyov S.V., Mironov E.V., Kuvaeva E.Yu., Sakharov S.E., Kolobova V.V. The influence of operating parameters of equipment on the wear rate of structural materials. Russian chemical journal. 2023. T. LXVII, No. 1. P. 6469. DOI: 10.6060/ rcj. 2023671.9 Blinichev V.N., Labutin A.N., Zueva G.A., Kolobov M.Yu., Alekseev E.A., Volkova G.V., Vorobyov S.V., Kozlov A.M., Kokurina G. N., Lysova M.A., Mironov E.V., Natareev S.V., Nevinitsyn V.Yu., Ponomareva Yu, N., Postnikova I.V., Sakharov S.E., Chagin O.V. Problems of developing energy- and resource-saving processes, reactor systems and intensive equipment, modeling and optimal control. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2023. T. 66. Issue. 7. P. 185-202. DOI: 10.6060/ivkkt.20236607.6845j Kolobov M.Yu., Gushchina T.V., Kolobova V.V. Increasing the efficiency of the grinding process in a centrifugal impact mill. Reliability and durability of machines and mechanisms. Collection of materials from the XV AllRussian Scientific and Practical Conference. Ivanovo, April 18 2024. P. 106–108.

Published
2024-12-12
How to Cite
Колобов, М., Силин, А., Морозов, М., Александров, Ю., Ротов, И., & Кокурина, Г. (2024). USING A CENTRIFUGAL MILL FOR GRINDING LIME. Modern High Technologies. Regional Application, 80(4), 111-114. Retrieved from https://snt-isuct.ru/article/view/6260
Section
Инженерно-технически науки, машиностроение и технологии

Most read articles by the same author(s)

1 2 3 > >>