THE KINETICS OF ABRASION OF GRANULAR MATERIALS IN A FLUIDIZED BED LAYER
Abstract
The results of an experimental study of the process of abrasion of granular materials are presented, on the basis of which an equation is proposed that allows calculating the mass of the product depending on the design parameters of the gas distribution device, technological parameters and physical and mechanical properties of the material with the possibility of using it to calculate the performance of continuous-action apparatus of one-, twoand three-stage type.
References
Petrov V.N., Shabalin A.S., Sopin V.F., Petrov
S.V., Malyshev S.L. Investigation of the interaction of a
turbulent axisymmetric jet with an obstruction Vestnik
of Kazan Technological University, vol. 20. No. 2. 2017.
S. 93-96.
Giersemehl, M., G. Plihal. Fine Grinding System with Impact Classifier Mill and Cyclone Classifier.
Company Affiliation: Neuman & Esser GmbH Mahlund Sichtsysteme. Journa l: powder handling & processing. 1999 V. 11. N: 3 P. 269.
Berthiaux H., Dodds J. Modelling fine grinding
in a fluidized bed opposedjet mill Part 1: Batch grinding
kinetcs. Powder Techn. 1999. N 106, P. 78-87.
Heng P.W.S., Chan L.W., Lee C.C. Ultrafine
grinding using a fluidized bed opposedjet mill: effect of
process parameters on the size distribution of milled
particles. S.T. P. PharmaSciences. 2000. N 10, P 445-
Vogel L., Peukert W. Modelling of grinding in
an Air Classifier Mill Based on a Fundamental Material
Function. KONA. 2003. N 21. P 109-120
Agapov Yu.N., Lukyanenko V.I., Bardin A.P.,
Stogney V.G. The influence of the height of the fluidized bed on the parameters of the gas distribution grid.
Bulletin of VSTU. Series: Energy. vol. 2. No. 6. 2006.S.
-143.
Agapov D.Yu., Nadeev A.A., Rodionov K.N.,
Stogney V.G., Kleinikov I.Y. Experimental comparison
of gas distribution devices for the formation of a centrifugal layer. Bulletin of the Voronezh State Technical
University. V. 8. N. 7-1. 2012. P. 118-121.
Kalashnikova N.V., Volzhentsev A.V. Improving the technological process of drying wheat grain with
the justification of the parameters of the fluidized bed
dryer. Bulletin of agricultural science. V. 16. N. 1. 2009.
P. 44-45.
Volzhentsev A.V. Determination of the quality
of grain liquefaction in dryers. Education, science and
production. N. 4 (9). 2014.P. 4-7.
Gvozdev D.V., Salnikov A.A., Fomichev A.G.
Calculation and design of apparatuses with a fluidized
bed of granular material. Gas distribution grilles. Izv.
MVO USSR, Series Chemistry and Chemistry. No. 4.
p. 38.
Greek F.Z. On the geometric characteristics of
gas distribution grilles. Chem. prom 1966. p. 67-68
Afanasyeva O. V., Mingaleeva G. R. Apparatus
for producing activated carbon on a mini-thermal power
plant. News of Tomsk Polytechnic University. Engineering of geo-resources. T. 330. No. 9, 2019. P. 42-50.
Todes O. M. Devices with a fluidized granular
layer: (Hydraulic and thermal fundamentals of work) L.:
Chemistry: Leningrad. Separation. 1981. 296 p.
Yakovlev V. A., Sakhibgareev A. F. Aerodynamic design features of mixture-preparation systems for
slotted gas-turbine units with forced air supply. Academy, N. 7 (34). 2018.P. 23-25.
Beloglazov I.I., Sharikov Y.V., Beloglazov I.N.
Study of the distribution of the residence time of firing
products in a fluidized bed furnace. Zapiski Mining
Institute, V. 169. 2006. P. 61-62
